MARKFORGED
Onyx
40 MPa
5.8 ksi
Tensile Strength at Yield
330 J/m
6.18 ft-lb/in
Impact Strength (Notched)
145 °C
293 °F
Heat Deflection Temperature
40 MPa
5.8 ksi
Tensile Strength at Yield
330 J/m
6.18 ft-lb/in
Impact Strength (Notched)
145 °C
293 °F
Heat Deflection Temperature
Characteristics
Description:
Onyx is a micro carbon fiber-filled nylon that gives a great surface finish and accurate prints. Onyx parts are high strength, high toughness, and are chemical resistant even without reinforcements. Add Continuous Fiber can make Onyx as strong as aluminum.
Cost:
$$
$$$
Typical Lead Time:
1-2 Days
Layer Height:
High 0.05 mm, Standard 0.1 mm
x/y Tolerance:
±0.25 mm
Infill Percent:
28-55% or 100%
Color:
Black
Manufacturing Processes:
FDM/Continuous Fiber Reinforcement
Material Properties
Tensile Modulus:
2.4 GPa
Tensile Stress at Yield:
40 MPa
Tensile Stress at Break:
37 MPa
Tensile Strain at Break:
25 %
Flexural Strength:
71 MPa
Flexural Modulus:
3.0 GPa
Heat Deflection Temp:
145 °C
Izod Impact (notched):
330 J/m
Density:
1.2 g/cm3
Onyx
Nylon-based material blended with chopped micro carbon fiber; used to create strong and tough parts.
Flexural Strength
71 MPa
Onyx
Heat Deflection Temp
145°C
Onyx